Hoppa till innehåll
Free shipping on orders over 3000 kr excl. VAT! Volume discount: 5 pcs 2% · 10 pcs 3% · 25 pcs 5%
Volume discount: 5 pcs 2% · 10 pcs 3% · 25 pcs 5%Reflections on shiny metal surfaces cause defects to be missed, but a polarizing filter removes themA 0.1 mm groove is visible in the image but can’t be measured: how to get both sharpness and depth from the same microscopeMeasure directly in the image: no more guessing the magnification or fighting reflections during microscopic inspectionSee inside the machine without taking it apart: a camera in the tip gives a sharper image than fiber opticsReflections hide the flaw: how to see scratches, burrs and solder defects on shiny surfacesSpotting the fault in the pipe before you tear up the floor saves more than the repair itselfShiny metal surfaces hide scratches and cracks until the reflections disappear from the imageSee what’s behind the hole: documented inspection of tight spaces without disassemblySharp Images of Shiny Surfaces: How to See Scratches and Pores That Ordinary Light HidesShiny metal surfaces can be measured: how to remove reflections from the microscope imageVolume discount: 5 pcs 2% · 10 pcs 3% · 25 pcs 5%Reflections on shiny metal surfaces cause defects to be missed, but a polarizing filter removes themA 0.1 mm groove is visible in the image but can’t be measured: how to get both sharpness and depth from the same microscopeMeasure directly in the image: no more guessing the magnification or fighting reflections during microscopic inspectionSee inside the machine without taking it apart: a camera in the tip gives a sharper image than fiber opticsReflections hide the flaw: how to see scratches, burrs and solder defects on shiny surfacesSpotting the fault in the pipe before you tear up the floor saves more than the repair itselfShiny metal surfaces hide scratches and cracks until the reflections disappear from the imageSee what’s behind the hole: documented inspection of tight spaces without disassemblySharp Images of Shiny Surfaces: How to See Scratches and Pores That Ordinary Light HidesShiny metal surfaces can be measured: how to remove reflections from the microscope image

The AM3715TB Strobe Microscope: When the pump rotates at 3000 rpm and the image still needs to be sharp

Published July 3, 2026 at 21:16

Observing rotating objects with a standard microscope is one of the most frustrating experiences in technical optics. A gear being turned on a lathe at 800 rpm appears as a blurry band. A grinding roller running at 3000 rpm is completely invisible as a structure — it exists only as a homogenous ”veil.” The standard solution is to stop the machine, measure the stationary object, and then start it up again. This is impractical for several reasons: measuring at a standstill does not capture the dynamic loads that occur during operation, and constantly halting the production line for measurement is unacceptable in series production. The stroboscopic microscope solves this problem with a simple yet elegant concept.

How stroboscopic technology works

The basic principle is well-established: if a rotating object is illuminated with short, precisely synchronized flashes of light that match the object’s rotational frequency, the object will appear completely stationary. This is the same principle that makes the wheels of a car appear to stand still or rotate backwards in films — the camera’s shutter and the wheels are inadvertently synchronized.

The Dino-Lite AM3715TB stroboscopic microscope utilizes this technique by design. The instrument features 8 powerful LEDs that can pulse at a user-controlled frequency from 30 fps and upwards. At the correctly set pulse frequency, the rotation appears to freeze, allowing the camera to capture sharp, clear images of the rotating object’s fine details.

Dino-Lite AM3715TB stroboscopic microscope with 8 powerful LEDs

External trigger for synchronization

The instrument features an external trigger input that enables synchronization with the actual rotational frequency of the rotating object. This is the critical feature that makes the technology practically viable.

Without an external trigger, the operator must manually adjust the strobe frequency until it matches the rotation — which can take minutes of iterative adjustments, and the correct frequency remains sensitive to the slightest drift.

With an external trigger — typically an optical sensor or tachometer on the rotating object — the strobe automatically adapts its flash rate to the rotational frequency. The object remains static in the image whether it rotates at 500 or 5000 rpm, even if the rotational speed fluctuates during measurement.

Why the technology only works under specific conditions

Stroboscopic technology has practical limitations that are essential to understand:

Low ambient lighting: Works best below 20 lux (dimly lit room or night). Becomes ineffective above 80 lux (typical office lighting). The reason: the strobe’s brief flashes are overwhelmed by continuous ambient light, which introduces motion blur.

Working distance of 3-15 cm: The effective operational range. Outside this zone, the strobe’s light is either too weak or overly concentrated.

IR-cut filter above 650 nm: The instrument features a built-in IR-cut filter to prevent thermal red radiation from the process (such as hot metal) from washing out the camera image. This is particularly important when inspecting machining processes where workpiece temperatures can run high.

Optical specifications

The instrument offers magnification from 20x to 220x — the same range as other Dino-Lite Edge models. The working distance at various magnifications is also standard for the Edge series: 60 mm at 20x, down to approximately 3 mm at 220x.

The sensor is VGA (640×480) — lower than most other Dino-Lite models. This is intentional: stroboscopic imaging requires high sensor sensitivity, and a lower pixel count provides more light gathering per pixel. A 5-megapixel sensor would make the strobe practically unusable in dimly lit environments.

Where the stroboscopic microscope makes a real difference

Production line monitoring: Inspection of fast-moving components in manufacturing processes. Labeling, packaging, component assembly — all involve parts passing the inspection point at high speeds.

Rotor and blade inspection: Compressor blades, turbine rotors, rotating wind turbine blades. Static inspection does not reveal how blades deform under operating conditions — dynamic inspection with a strobe does.

In-operation gear inspection: Wear, deformation, and load distribution on gear teeth can only be accurately analyzed when the gears are rotating under load. A stroboscopic microscope makes this possible.

Electronics inspection: Slip rings, rotating fittings, motors in operation. All of these are difficult to inspect using conventional methods.

Vibration analysis: Vibration modes and amplitudes can be visualized directly by synchronizing the strobe with the vibration frequency. Critical for advanced mechanical diagnostics.

Cell motility and biology: Fast-moving bacteria, cellular organelles under the microscope. Living organisms undergoing natural motion can be observed without arresting their movement.

Fluid flow and particle dynamics: Particles suspended in fluid flow. A synchronized strobe enables tracking of particle trajectories.

Paper manufacturing and printing: Rotating cylinders with print images or patterns must be inspected during operation. Stroboscopic technology is standard practice in modern printing facilities.

Textile manufacturing: Looms with fast-moving yarns, knitting machines, industrial sewing machines. In-line quality control is significantly simplified using a strobe.

Research and educational applications: Physics laboratories where moving mechanisms need to be observed. The visually striking effect of the strobe also offers immense pedagogical value.

What you get for your investment

A Dino-Lite EDGE series microscope with stroboscopic illumination, 8 LEDs, external trigger input for synchronization, high-sensitivity VGA sensor (640×480), 20-220x magnification, USB 2.0 connectivity, IR-cut filter above 650 nm, compatibility with Windows 7-11 and DinoCapture 2.0 software, housed in a robust metal casing.

At 5 733 SEK, it is an investment in a specialized tool that makes inspection tasks possible that no other handheld instrument can manage. For industrial technicians performing quality control on fast-moving components, it is often the single piece of equipment that makes the difference between systematic analysis and pure guesswork.

Read more: Dino-Lite AM3715TB stroboscopic microscope in the shop →

More news

All news