Published 15 October 2026 at 14:06
Many of us have stood there with a flashlight and a dental mirror, trying to determine whether a cross bore has burrs, whether a cooling passage in a machine is clogged, or whether a crack can be seen. The answer often ends up being a guess, and the only sure way to find out is to take it apart. That costs time, and sometimes it isn’t possible at all without stopping production.
A fiberscope with its own screen
The LCD Monitor-Endoskop is a fiberscope, also known as a borescope, with a probe 5.5 mm in diameter and 1,000 mm in length. Unlike simpler eyepiece models, a 3.5-inch TFT screen with a resolution of 640 x 480 is mounted directly on the instrument. The brightness is adjustable, which is important when surfaces vary between shiny metal and dark deposits.
What it solves
The first problem is access. A 5.5 mm probe can get into bores, channels and gaps that neither the eye nor a mirror can reach. The second is documentation. Images and video are saved to a standard SD card, which holds several thousand images, and the files can be transferred to a computer via USB 2.0. Then ”it looked okay” is no longer all you have. You can show exactly what you saw, at which point and in what condition. If needed, mirrors for other viewing angles and magnets are available as add-ons, for example for retrieving small objects.
Three situations where it is used
Machine shops and manufacturing. After machining hydraulic blocks or mold tools, you can check for chips, burrs and surface damage in cross channels. A saved photo can be attached to the quality report.
Maintenance of engines and machinery. Cylinder bores, cooling channels and gearbox housings can be examined without disassembly. You can see wear or deposits before they cause a breakdown.
Plumbing and process equipment. In pipe bends, behind inspection hatches and inside enclosed machine housings in food production, you can check for deposits or forgotten objects. It is a quick way to verify that something is clean or has been fixed.
Why it pays off
Consider just a single unnecessary disassembly: working time for two people, downtime, new gaskets and the risk of something being reassembled incorrectly. Often that costs more than the entire instrument. Disputes are also reduced. When a supplier fault or a complaint can be substantiated with a picture, the case is resolved faster, and troubleshooting becomes more accurate because you know where to open up.
The fiberscope is not an instrument for every situation. The resolution is 640 x 480 and the probe is one meter long, so for long pipe runs a different solution is needed. But for most inspections inside machines, valves and enclosures, the dimensions are well chosen and the instrument is simple to use.
If you would like to see specifications and accessories, the full product is described in our shop.