Hoppa till innehåll
Free shipping on orders over 3000 kr excl. VAT! Volume discount: 5 pcs 2% · 10 pcs 3% · 25 pcs 5%
Volume discount: 5 pcs 2% · 10 pcs 3% · 25 pcs 5%See the solder joint and surface defect on a screen instead of through a magnifier, and document it right awayReflections on shiny metal surfaces cause defects to be missed, but a polarizing filter removes themA 0.1 mm groove is visible in the image but can’t be measured: how to get both sharpness and depth from the same microscopeMeasure directly in the image: no more guessing the magnification or fighting reflections during microscopic inspectionSee inside the machine without taking it apart: a camera in the tip gives a sharper image than fiber opticsReflections hide the flaw: how to see scratches, burrs and solder defects on shiny surfacesSpotting the fault in the pipe before you tear up the floor saves more than the repair itselfShiny metal surfaces hide scratches and cracks until the reflections disappear from the imageSee what’s behind the hole: documented inspection of tight spaces without disassemblySharp Images of Shiny Surfaces: How to See Scratches and Pores That Ordinary Light HidesVolume discount: 5 pcs 2% · 10 pcs 3% · 25 pcs 5%See the solder joint and surface defect on a screen instead of through a magnifier, and document it right awayReflections on shiny metal surfaces cause defects to be missed, but a polarizing filter removes themA 0.1 mm groove is visible in the image but can’t be measured: how to get both sharpness and depth from the same microscopeMeasure directly in the image: no more guessing the magnification or fighting reflections during microscopic inspectionSee inside the machine without taking it apart: a camera in the tip gives a sharper image than fiber opticsReflections hide the flaw: how to see scratches, burrs and solder defects on shiny surfacesSpotting the fault in the pipe before you tear up the floor saves more than the repair itselfShiny metal surfaces hide scratches and cracks until the reflections disappear from the imageSee what’s behind the hole: documented inspection of tight spaces without disassemblySharp Images of Shiny Surfaces: How to See Scratches and Pores That Ordinary Light Hides

Peak RL-B-10 10x Crack Magnifier with 0.1 mm Scale: Why Building Inspectors Classify Concrete Cracks by Width and How a 30° Angled Brass Scale Facilitates Measurement

Published July 11, 2026 at 00:03

A building inspector is examining a 40-year-old concrete parking deck. Cracks are everywhere — that is normal for concrete. The question is: which cracks are cosmetic, and which are structurally concerning? According to Eurocode 2 and Swedish building standards, the line is clear. A crack under 0.2 mm wide in a normal environment is likely superficial and cosmetic. Between 0.2–0.3 mm, it requires further monitoring. Over 0.3 mm indicates a structural problem that needs to be investigated by a structural engineer. Over 0.5 mm, it is acute.

But how do you distinguish between 0.15 mm and 0.25 mm? The naked eye cannot. A standard ruler cannot. What is needed is a crack measuring loupe — a handheld instrument with 10x magnification and a 0.1 mm graduated scale placed directly over the crack.

What Eurocode 2 says about crack tolerances

The regulatory framework for crack widths in concrete structures is found in Eurocode 2 (EN 1992-1-1). The standard reference table looks roughly like this:

  • 0.1–0.2 mm: Acceptable in normal environments. No action required.
  • 0.2–0.3 mm: Limit value for XC1–XC2 exposure classes (dry or mostly dry environments). Acceptable, but should be monitored.
  • 0.3–0.4 mm: Acceptable only in well-protected spaces. Under outdoor exposure, it indicates insufficient reinforcement cover or an exceeded load.
  • 0.4–0.5 mm: Consider a structural investigation. May indicate reinforcement corrosion if exposure is moist or saline.
  • Over 0.5 mm: Acute. Structural investigation is mandatory. May indicate overloading, incorrect reinforcement, or active corrosion.

This scale applies to standard concrete structures. For water reservoirs, tunnel constructions, or marine-exposed structures, the limit values are stricter (typically half of these values).

Peak RL-B-10 optical design

The RL-B-10 crack measuring loupe features 10x magnification and an apochromatic lens design. Here is what that means technically:

A standard loupe (e.g., a single plano-convex lens) has two inherent optical aberrations:

  1. Spherical aberration: Light passing through the outer edges of the lens bends differently than light passing through the center. This creates a blurry edge around the field of view.
  2. Chromatic aberration: Different colors (wavelengths) refract by varying amounts. When viewing a white-lit object, color fringing is visible around the edges (typically blue on one side, red on the other).

An achromatic lens doublet (two lenses cemented together, one crown glass and one flint glass) PARTIALLY corrects for BOTH aberrations. Red and blue light are brought into focus at the same point, while green remains slightly out of focus.

An apochromatic lens triplet (three lenses in two groups) corrects for THREE wavelengths simultaneously — red, green, and blue all converge on the same focal plane. The result: a completely distortion-free image with sharp color rendering.

The RL-B-10 optical configuration:

  • One achromatic doublet (two lenses cemented together).
  • Two single lenses.
  • Combined: an apochromatic system.

The trade-off for this optical sophistication: greater weight, a higher price (3 762 kr vs. ~1 000 kr for simple loupes), but significantly superior image quality.

The scale: brass reticle at a 30° angle

What makes the RL-B-10 truly unique is its measuring scale. At the base of the loupe housing sits a brass plate with a LASER-ENGRAVED 0.1 mm graduation. The plate is matte chrome-plated to eliminate reflections, and it is mounted at a 30° ANGLE relative to the loupe’s optical axis.

Why all these details?

Why brass instead of glass? Standard measuring loupes use glass reticles. Glass is transparent, making bottom illumination through the scale straightforward. However, glass is also sensitive to impacts, can crack, and requires perfectly flat surfaces to sit flush against the measured object. Brass scales are wear-resistant, can withstand drops onto hard surfaces without breaking, and the graduations will not degrade over time. The trade-off: the scale is opaque, so illumination must come from ABOVE.

Why laser-engraved? Traditional scales were produced using mechanical engraving or stamping. Modern laser engraving technology (developed in the 1990s) delivers a graduation accuracy of 0.01–0.02 mm with perfectly uniform line widths. This is critical for a 0.1 mm scale — if the graduation lines vary in width, measurement readings become unreliable.

Why a 30° angle? If the scale lay completely flat (0° angle), it would be on the same plane as the measured object. Ambient light entering the loupe would reflect straight back off the scale into the eye, causing glare. At 30°, the light reflects away from the line of sight. The scale appears dark against a bright background — providing ideal contrast.

This 30°-angled layout is a classic optical design from Peak (a Japanese manufacturer) that has been used since the 1970s. No other manufacturer has matched this implementation as effectively — the RL-B series remains the premium reference standard in this field.

Peak Spricklupp RL-B-10 10x med 0,1 mm mässings-skala

Adjustable focus — not all loupes have it

The RL-B-10 features a HEIGHT-ADJUSTABLE LENS SYSTEM. This means the operator can slide the loupe barrel up or down to focus on objects at varying distances. Standard measuring loupes have a fixed focus (a specific working distance, ~10–20 mm). A fixed focus works well on flat surfaces, but becomes problematic on:

  • Curved surfaces (pipes, rollers).
  • Uneven surfaces (weld seams with irregularities).
  • Deep cracks where you need to inspect further down into the fissure.
  • Operators with different individual eye focus requirements.

Adjustable focus resolves these issues. The focusing range is typically 5–15 mm from the loupe base.

Technical specifications

  • Magnification: 10x.
  • Optical design: Apochromatic (2 single lenses + 1 achromatic doublet).
  • Field of view: 20 mm in diameter.
  • Working distance: 10 mm (from the loupe base to the focal plane).
  • Scale: Brass plate, laser-engraved, matte chrome-plated, 30° angled.
  • Scale graduation: 0.1 mm.
  • Practical scale limit: approx. 40 μm (0.04 mm) — narrowest visible detail at 10x.
  • Focusing: Adjustable sliding system.
  • Dimensions: 30 × 51 mm.
  • Weight: 55 grams.
  • Supplied with a plastic case.
  • Replacement scales can be ordered separately if the scale is damaged or worn.

Who uses a crack measuring loupe?

Building inspectors: Annual or periodic inspection of concrete structures. Bridges, parking decks, masonry, tunnel constructions. A standard tool in the inspector’s kit.

Structural engineers and designers: When investigating reported issues. Classifying the crack before deciding on remedial actions.

Metallurgical technicians (NDT — Non-Destructive Testing): Following dye penetrant testing or magnetic particle testing, the crack loupe is used to QUANTIFY the size of detected cracks. Also used for assessing fatigue cracks in metals.

Welding inspectors: Following visual inspection of weld seams, crack widths are measured in marked areas. A standard tool for ISO 5817 classification of weld defects.

Automotive technicians and vehicle inspectors: Cracks in brake discs, wheel arches, body structures.

Aviation maintenance: Fatigue cracks in metal airframe structures are critical. The crack loupe is used during A/B/C/D check inspections.

Railway maintenance: Rail track inspection, wheel inspection. Monitoring crack growth over time.

Marine and vessel maintenance: Stress corrosion cracking on hulls, propeller shafts, deck structures.

Cement and concrete manufacturing: Quality control of precast concrete elements.

Conservators: Cracks in ceramics, glass, stone (antique artifacts, historic structures).

How to use it in practice

Standard workflow:

  1. Visually locate the crack.
  2. Clean the surface around the crack using a brush or compressed air. Dust and debris make accurate readings difficult.
  3. Place the crack measuring loupe with its base flat against the surface, positioning the crack beneath the scale. The scale should sit perpendicular to the crack.
  4. Adjust the focus until the crack appears completely sharp.
  5. Position the scale so that a clear graduation mark aligns with the widest point of the crack (cracks are rarely uniform in width along their entire length).
  6. Count the number of 0.1 mm graduations between the two edges of the crack.
  7. Record the value in the inspection report along with the crack location and the date.

When measuring multiple cracks, the standard practice is to measure at three different positions along the crack (beginning, middle, end) and report the largest value.

Documentation for trend analysis

A single crack width measurement does not tell the full story. What is critical is the TREND over time. A 0.2 mm crack that remains stable is likely cosmetic; a 0.2 mm crack that expands to 0.3 mm over a year is structurally concerning.

Practical workflow for documentation:

  • Photograph the crack with the crack loupe scale visible in the frame.
  • Record the exact location (GPS coordinates + photo reference).
  • Date and sign the record.
  • During annual follow-up inspections, revisit the exact same location. Generate a trend graph.

What you get for the price

Peak Lupe RL-B-10 crack measuring loupe, 10x magnification, apochromatic optics (2 single lenses + 1 achromatic doublet), 20 mm field of view, 10 mm working distance, brass measuring scale with laser-engraved 0.1 mm graduations mounted at a 30° angle, height-adjustable focusing system, matte chrome anti-glare scale finish, 30 × 51 mm dimensions, 55 grams weight, plastic case included, replacement scales available. 3 762 kr.

The standard tool for professional crack measurement in building inspection, metallurgical NDT, welding QC, and other applications where precise crack width measurement is decisive for safety or quality evaluations. The apochromatic optical design and 30°-angled brass scale ensure optimal readability and reliability, even after hours of field inspections. For occasional household use, basic 10x magnifiers may suffice, but for professional applications where structural integrity or safety is at stake, investing in this dedicated crack measuring loupe is thoroughly justified.

Read more: Peak Lupe RL-B-10 crack measuring loupe in the shop →

More news

All news