Published July 12, 2026 at 14:26
A document expert working on an insurance investigation inspects an aging bank check. The client claims that the check number has been altered — the original digit was erased using a diluted chemical and the new number written over it. Under standard lighting, the paper appears uniformly white. No suspicious smudges are visible to the naked eye.
The expert switches the Dino-Lite AM4115TL-FVW microscope from white LEDs to 395 nm UV LEDs. The display changes dramatically. Now visible:
- The standard check paper glows a bluish-white — as expected.
- An area of approximately 20 × 30 mm of the paper appears DARK AGAINST the background — this is where the chemical was applied to bleach the original number. The paper’s fluorescent additives have been destroyed by the chemical.
- The new digit is visible under UV light, but displays a different color than it would on undamaged paper.
Diagnosis: document manipulation. A report is sent to the insurance company. The evidence relies entirely on the ability of the 395 nm UV-LED illumination to reveal the invisible.
395 nm: The Near-UV Band
UV light covers wavelengths from 100 to 400 nm. Sub-bands:
- UV-C (100–280 nm): Deep UV. Extremely hazardous to humans (causes corneal flash burns and skin cancer within minutes). Used for sterilization. UV-C LEDs are expensive (2,000+ SEK per LED).
- UV-B (280–315 nm): Mid-range UV. Harmful with extended exposure. Causes sunburn, stimulates vitamin D synthesis. UV-B LEDs exist but are expensive.
- UV-A (315–400 nm): Near-UV. Partially visible as deep violet. Standard UV-A LEDs are affordable and safe under reasonable exposure.
395 nm lies on the UV-A boundary near the visible spectrum. This band offers several advantages:
- Cost-effective LED production (10–30 SEK per LED).
- Safe under reasonable exposure.
- Generates STRONG fluorescence in many everyday materials.
- CMOS sensors remain highly sensitive within this band.
The Fluorescence Phenomenon
When UV photons (395 nm = 3.14 eV energy) are absorbed by certain molecules, electrons are excited to higher energy levels. As these electrons return to their ground state, new photons are emitted — at a LOWER energy (longer wavelength) than the absorbed light.
Examples:
- 395 nm absorbed → 440–480 nm emitted (blue fluorescence).
- 395 nm absorbed → 500–550 nm emitted (greenish-yellow fluorescence).
The difference between absorption and emission wavelengths is known as the Stokes shift (discussed previously in our article on fluorescence microscopy). The magnitude of the shift depends on the specific molecule.
What UV Light Reveals
Fluorescent-treated paper: Modern paper contains optical brightening agents (OBAs) that fluoresce blue. Under UV illumination, the paper glows brightly. Historical papers (pre-~1950) lack OBAs and do not glow.
Security printing: Banknotes, passports, ID cards, and checks incorporate embedded UV-reactive security features — visible only under UV light. A standard tool for document authentication.
Biological residues: Body fluids (blood, urine, saliva, semen, sweat) fluoresce. Blood appears dull red; urine glows yellow-green. A standard method in crime scene investigation and sanitation verification.
Minerals and ceramics: Many minerals exhibit characteristic fluorescence. Quartz fluoresces blue, calcite red, opal greenish. A valuable tool for geology and antique authentication.
Textile additives: Detergent residues and fabric softeners contain fluorescent whitening agents. UV light reveals how effectively textiles have been rinsed.
Paint restoration: Art conservators use UV to distinguish ORIGINAL painted surfaces from later overpainting. Newer paint fluoresces differently.
Electronics inspection: Certain solder flux residues fluoresce. UV inspection quickly highlights improperly cleaned PCBs.
Limewash and mortar: Lime-based building materials fluoresce. Structural damage and later repairs stand out clearly from the original material.
Dual Illumination: Both UV and White Light
The AM4115TL-FVW is equipped with both 395 nm UV LEDs AND white LEDs. The operator can toggle between them or run both simultaneously. Practical scenarios:
- White light only: Standard inspection. Verify image orientation and locate regions of interest.
- UV only: Fluorescence inspection. Identify fluorescent features without interference from reflected ambient light.
- White + UV: Combined illumination. Fluorescent features are highlighted AGAINST a standard reflected background. Highly practical for correlating fluorescent markers with physical surface features.
Long Working Distance — 29 mm
Standard Dino-Lite models feature a 5–10 mm working distance. The AM4115TL provides a 29 mm working distance (without the front cap). This provides significantly more clearance.
Advantages of a long working distance:
- Ample room for tools between the microscope and object (tweezers, brushes, soldering irons).
- Side-angle illumination is possible without being blocked by the microscope housing.
- Improved ergonomics — the operator does not have to crowd over the subject.
- Ability to inspect large or irregularly shaped objects.
Trade-off: Magnification is typically limited to 10–140x (at longer working distances, magnification decreases proportionally). Standard Dino-Lite units reach 200–500x with shorter working distances.
MicroTouch Button
The AM4115TL features a touch-sensitive sensor on the microscope body — the MicroTouch button. It can be configured to:
- Capture still images.
- Start/stop video recording.
- Toggle the LEDs on/off.
- Trigger barcode scanning.
The advantage: The operator can capture images without manually pressing hard buttons or clicking a computer mouse. This eliminates hand-shake blur that would otherwise degrade image clarity.
Interchangeable Front Cap
The front cap is fully detachable. Several specialized caps are available for diverse applications:
- Standard open cap for general microscopy.
- Short cap for extended working distances (up to 140 mm).
- Polarizing cap (for eliminating glare on reflective surfaces).
- Diffuser cap (for softer, more uniform lighting).
Easily swapped without tools — allowing fast adaptation to the measurement task at hand.
Specifications
- Sensor: 1.3 Megapixel CMOS.
- Optical magnification: 10x–140x.
- Illumination: 4 × UV LEDs (395 nm) + 4 × white LEDs.
- Filter: 650 nm long-pass for specialized applications.
- Working distance: 29 mm (without front cap).
- Interface: USB 2.0 to PC/Mac.
- Software: DinoCapture 2.0.
- No built-in polarizer (available in separate dedicated models).
Target Applications
Document forensics: Bank checks, contract analysis, counterfeit detection.
Forensic science: Blood spatter analysis, biological residues.
Art conservation: Painting restoration, paper conservation.
Philately and collectibles: Stamp authentication, security print inspection.
Geology: Mineral identification via fluorescence.
Sanitation verification: Cleaning efficacy audits in hospitals, hospitality, and food processing.
Electronics manufacturing: PCB flux cleaning QC.
Textile testing: Detergent residue analysis, fabric dye evaluation.
Value for Money
The Dino-Lite AM4115TL-FVW USB microscope features 4 × 395 nm UV LEDs + 4 × white LEDs, a 1.3 megapixel CMOS sensor, 10–140x optical magnification, a 650 nm long-pass filter, a 29 mm long working distance for tool clearance, a MicroTouch sensor for blur-free image capture, USB 2.0 connectivity, DinoCapture 2.0 software, and an interchangeable front cap design. 7,582 SEK.
The industry-standard instrument for document forensics, crime scene analysis, conservation, mineralogy, and any application where UV fluorescence is the primary inspection method. Combining UV and white light with a long working distance provides exceptional versatility for multi-parameter inspections. Dedicated UV-only models are available at a lower price point, but the dual illumination is well worth the investment.
Learn more: Dino-Lite AM4115TL-FVW UV Microscope in the Store →