Hoppa till innehåll
Free shipping on orders over 3000 kr excl. VAT! Volume discount: 5 pcs 2% · 10 pcs 3% · 25 pcs 5%
Volume discount: 5 pcs 2% · 10 pcs 3% · 25 pcs 5%What You Can’t See Around the Corner Costs More Than What You Dismantle to Get AccessSee the solder joint and surface defect on a screen instead of through a magnifier, and document it right awayReflections on shiny metal surfaces cause defects to be missed, but a polarizing filter removes themA 0.1 mm groove is visible in the image but can’t be measured: how to get both sharpness and depth from the same microscopeMeasure directly in the image: no more guessing the magnification or fighting reflections during microscopic inspectionSee inside the machine without taking it apart: a camera in the tip gives a sharper image than fiber opticsReflections hide the flaw: how to see scratches, burrs and solder defects on shiny surfacesSpotting the fault in the pipe before you tear up the floor saves more than the repair itselfShiny metal surfaces hide scratches and cracks until the reflections disappear from the imageSee what’s behind the hole: documented inspection of tight spaces without disassemblyVolume discount: 5 pcs 2% · 10 pcs 3% · 25 pcs 5%What You Can’t See Around the Corner Costs More Than What You Dismantle to Get AccessSee the solder joint and surface defect on a screen instead of through a magnifier, and document it right awayReflections on shiny metal surfaces cause defects to be missed, but a polarizing filter removes themA 0.1 mm groove is visible in the image but can’t be measured: how to get both sharpness and depth from the same microscopeMeasure directly in the image: no more guessing the magnification or fighting reflections during microscopic inspectionSee inside the machine without taking it apart: a camera in the tip gives a sharper image than fiber opticsReflections hide the flaw: how to see scratches, burrs and solder defects on shiny surfacesSpotting the fault in the pipe before you tear up the floor saves more than the repair itselfShiny metal surfaces hide scratches and cracks until the reflections disappear from the imageSee what’s behind the hole: documented inspection of tight spaces without disassembly

Dino-Lite RK-02 gooseneck stand with clamp mount: When the edge of a workbench, workshop bench, or fixture structure is the only available mounting point and a 60 cm flexible arm reaches into tight geometries

Published July 16, 2026 at 10:28

Dino-Lite digital microscopes can be handheld for quick inspections, but for PRECISE WORK (measurement, photo, video), A STAND is required to hold the instrument stable in a chosen position. The standard stand family consists of several variants for different application scenarios:

  • RK-06 (fixed round base): Standard lab stand. The base is placed on a flat workbench.
  • MSA series (microscope stand adapters): Adapters that connect Dino-Lite to standard microscope stands.
  • RK-02 (this model, gooseneck with C-clamp): Flexible arm that clamps anywhere.
  • RK-10 (compact lab stand): Smaller lab standard with a reduced footprint.

The RK-02 gooseneck stand is the ULTIMATE FLEXIBLE solution for non-standard workspaces.

Why C-clamps dominate over fixed-base stands in the field

Standard fixed-base stands have REQUIREMENTS for the workbench:

  • The tabletop surface must be flat.
  • The table must have 20–30 cm of free space for the stand base.
  • The base must stand stably without slipping.
  • The height of the stand is limited to 30–60 cm (without extensions).

Many practical working scenarios break these requirements:

Workshop bench with varied tool inventory: Fixed-base stands take up valuable work surface area. A C-clamp mounts on the edge of the bench, leaving the work area free.

Field service on industrial machinery: The machine has no flat surfaces for a stand base. The C-clamp clamps onto the machine structure (top plates, edges, pipes).

Clinical practice (dental, veterinary): The examination chair has curved surfaces. The C-clamp mounts to the edge of the chair or the arm of the examination lamp.

Outdoor inspection: No table at all. The C-clamp mounts to a vehicle tailgate, toolbox wall, or fence post.

60 cm gooseneck — flexible positioning

The gooseneck is 60 cm long with a 1.5 cm diameter. Constructed from spring-reinforced metal, it can be bent into ANY shape and holds that position until the operator actively changes it.

Key features:

  • 60 cm reach: From the clamp point, the Dino-Lite can be positioned nearly 60 cm away. Sufficient for most workpiece sizes.
  • Angular flexibility: Can be bent in any direction — horizontally, vertically, diagonally, S-shape, U-shape.
  • Stability hold: Once bent, the shape remains. No slipping under microscope weight or normal vibration.

C-clamp: 0–7 cm gap

The C-clamp clamps onto SURFACES up to 7 cm thick. This covers:

  • Standard workbench edges (2–4 cm thick).
  • Workshop bench edges (3–6 cm).
  • Edges of heavy metal plates (5–7 cm).
  • Clamping over a monitor frame or bookshelf edge (variable).

The clamp can be mounted HORIZONTALLY or VERTICALLY — depending on the surface orientation. This allows the stand to be mounted even on VERTICAL surfaces (e.g., machine side walls).

Rotating base + quick-release mount

The base can ROTATE after clamping to provide fine positioning without loosening the clamp. The quick-release mechanism allows for:

  • Quick repositioning of the microscope between work tasks.
  • Single-handed operation during mounting/dismounting.
  • Adaptation to uneven surfaces (the clamp can tolerate minor angular deviation).

HD-P1 holder for microscope attachment

Supplied with the HD-P1 holder, which screws the Dino-Lite microscope securely onto the far end of the gooseneck. The HD-P1 accepts:

  • The standard Ø32 mm Dino-Lite body (the majority of models).
  • The EDGE series (including EDGE PLUS with metal housing).
  • DermaScope and other medical variants.

The grip is suitably tight to prevent slipping, yet easily interchangeable without tools.

Compatibility – exceptions

NOTE: The RK-02 works with ALL Dino-Lite models EXCEPT models with HIGH MAGNIFICATION. Reason: the gooseneck arm has limited mechanical rigidity. At 400x+ microscope magnification, vibrations from the arm mechanics become visible in the image — the image blurs.

For high-magnification models (500x+), standard fixed-base stands (RK-06) or professional-grade lab stands are required.

Application scenarios where the RK-02 wins

1. Surgical operations with Dino-Lite documentation: The clamp is mounted on the operating lamp arm. The gooseneck is bent to position the Dino-Lite above the surgical field. The surgeon works freely underneath the microscope.

2. Toolmaker hands-on work: Clamped to the workbench edge. Dino-Lite positioned above the workpiece. The toolmaker works under the microscope with both hands free.

3. Electronics diagnostics inside chassis: Clamped to the chassis edge. The gooseneck reaches into the chassis over a specific component.

4. Clock and watch repair: Clamped to the watchmaker’s bench. The gooseneck holds the Dino-Lite as a ”third eye” over the watch movement.

5. Bench inspection of solder materials: Clamped to the technician’s workbench. Dino-Lite positioned above for documenting solder joints during low-speed manual inspection.

6. Outdoor field service: Clamped to a vehicle tailgate edge. Dino-Lite positioned over the repaired component for photo documentation.

Alternatives to gooseneck stands

RK-06 (fixed round base): ~2,000–3,000 SEK. Standard lab stand. Better stability, but requires a flat workbench.

RK-04 (extension-arm stand): ~4,000 SEK. Heavy-duty mounted arm with fine adjustment. For dedicated lab workstations.

RK-05A (compact industrial): ~3,000 SEK. Robust industrial stand for heavier duty.

Manual handheld use: Free, but the image tilts and shifts, making photo documentation difficult.

Magnetic base stand: ~2,500 SEK. Clamps onto magnetic surfaces (steel workshop benches).

Ergonomic considerations

Flexibility and stiffness: The gooseneck is spring-reinforced. After many years, the springs may lose their rigidity — the arm may begin to slowly sag under the weight of the microscope. Lifespan is typically 5–10 years of daily use.

ESD safety: The RK-02 is NOT ESD-safe. For semiconductor work, special ESD variants are required (RK-06E ESD standard).

Weight limitation: The gooseneck is designed for standard Dino-Lite weight (~180 g). Heavier Dino-Lite EDGE PLUS models (~250 g) work fine, but with prolonged use, the gooseneck may begin to drift.

Specifications

  • Model: Dino-Lite RK-02 gooseneck stand.
  • Gooseneck: 60 cm long, 1.5 cm diameter, spring-reinforced.
  • C-clamp: max 7 cm gap. Can be mounted horizontally or vertically.
  • Quick-release mount: Yes, for uneven surfaces.
  • Rotating base: Yes.
  • Microscope holder: HD-P1 (included).
  • Weight: 1.5 kg.
  • ESD-safe: No.
  • Compatibility: all Dino-Lite models EXCEPT high-magnification (>400x).
  • Warranty: 2 years (European).

What you get for your money

Dino-Lite RK-02 gooseneck stand with screw clamp mount, 60 cm flexible gooseneck arm, C-clamp for clamping onto 0–7 cm thick surfaces (horizontally or vertically mountable), quick-release mount for uneven surfaces, rotating base, HD-P1 microscope holder included, 1.5 kg weight, 2-year European warranty. 1,757 SEK.

The standard tool for operating rooms, toolmaker workshops, in-chassis electronics diagnostics, watchmaking, solder joint inspection, outdoor field service, and other applications where the Dino-Lite microscope needs to be positioned on non-standard surfaces. The added cost over ”manual handheld use” is dramatically justified because clear photo documentation REQUIRES a stable microscope position — freeing up both hands.

Read more: Dino-Lite RK-02 gooseneck stand in the store →

More news

All news