Hoppa till innehåll
Free shipping on orders over 3000 kr excl. VAT! Volume discount: 5 pcs 2% · 10 pcs 3% · 25 pcs 5%
Volume discount: 5 pcs 2% · 10 pcs 3% · 25 pcs 5%Why your reading is wrong when you read a scale with an ordinary loupe, and how telecentric optics remove the errorWhat You Can’t See Around the Corner Costs More Than What You Dismantle to Get AccessSee the solder joint and surface defect on a screen instead of through a magnifier, and document it right awayReflections on shiny metal surfaces cause defects to be missed, but a polarizing filter removes themA 0.1 mm groove is visible in the image but can’t be measured: how to get both sharpness and depth from the same microscopeMeasure directly in the image: no more guessing the magnification or fighting reflections during microscopic inspectionSee inside the machine without taking it apart: a camera in the tip gives a sharper image than fiber opticsReflections hide the flaw: how to see scratches, burrs and solder defects on shiny surfacesSpotting the fault in the pipe before you tear up the floor saves more than the repair itselfShiny metal surfaces hide scratches and cracks until the reflections disappear from the imageVolume discount: 5 pcs 2% · 10 pcs 3% · 25 pcs 5%Why your reading is wrong when you read a scale with an ordinary loupe, and how telecentric optics remove the errorWhat You Can’t See Around the Corner Costs More Than What You Dismantle to Get AccessSee the solder joint and surface defect on a screen instead of through a magnifier, and document it right awayReflections on shiny metal surfaces cause defects to be missed, but a polarizing filter removes themA 0.1 mm groove is visible in the image but can’t be measured: how to get both sharpness and depth from the same microscopeMeasure directly in the image: no more guessing the magnification or fighting reflections during microscopic inspectionSee inside the machine without taking it apart: a camera in the tip gives a sharper image than fiber opticsReflections hide the flaw: how to see scratches, burrs and solder defects on shiny surfacesSpotting the fault in the pipe before you tear up the floor saves more than the repair itselfShiny metal surfaces hide scratches and cracks until the reflections disappear from the image

LCD Monitor Endoscope 5.5 mm × 10 m: When 10 Metres of Flexible Fibre Optic Cable with SD Recording Replaces a Five-Hour Engine Block Teardown

Published July 4, 2026 at 18:10

For decades, endoscopy was a tool for physicians — the flexible fiber-optic cable that made it possible to see inside the human body without surgery. In the 1980s, industrial endoscopy emerged: the same technology adapted to inspect the interior of engines, drain pipes, tanks, ventilation ducts, and other inaccessible cavities without dismantling them. Today, industrial endoscopy is a standard tool in workshops, plumbing companies, and maintenance departments — but solutions vary dramatically in price, length, and ease of use.

What the instrument is

The LCD Monitor Borescope 5.5 mm × 10 m is a fiber-optic inspection instrument featuring:

  • 5.5 mm diameter probe head — the measuring end equipped with a camera and illumination LEDs.
  • 10 m flexible cable — an exceptional working reach for this diameter.
  • 3.5″ LCD TFT display (640×480) — built-in screen, no PC required.
  • SD card recording — images and video are saved directly to a standard SD card.
  • USB 2.0 transfer — media is easily transferred to a PC for reporting.
  • Adjustable brightness — LED lighting can be tailored to the inspection environment.

The unit is completely stand-alone — during an inspection, the operator only needs the instrument, an SD card, and sufficient working space. The 10 m long cable provides ample reach for most industrial and residential drainage applications.

LCD Monitor Borescope 5.5 mm probe head, 10 m fiber cable, 3.5" display

Why a 5.5 mm diameter is the most common compromise

Fiber-optic borescopes are manufactured in diameters ranging from 1 mm to 20+ mm. Choosing a diameter always involves a trade-off:

  • Under 3 mm — For narrow holes and microscopic cavities. Very limited light output, low resolution, short reach (often only 1–2 m).
  • 3–5 mm — For spark plug holes and small valve ports. Moderate illumination, limited reach.
  • 5–7 mm — The standard size for most inspection tasks. Sufficient brightness, good resolution, practical reach up to 10–15 m.
  • Over 8 mm — For larger pipes and cavities where space is not critical. Better image quality, but fewer application areas.

A 5.5 mm diameter represents the standard compromise: it passes through spark plug holes (M14 = 12 mm hole), fits into 25 mm drain pipes with ease, and enters cylinder head gasket openings without damaging sealing surfaces. The 10 m reach is sufficient for complete residential drainage runs, all standard engine inspections, and most industrial tank and ventilation tasks.

Built-in LCD — why it transforms day-to-day work

Borescopes come in two basic formats: USB-based models requiring a laptop or tablet, and stand-alone units with a built-in LCD. The difference in practical field use is substantial:

USB models: Suitable for controlled lab or workshop environments. They require a laptop or tablet to be on hand, fully charged, configured with the correct drivers, and capable of sufficient screen brightness for the current environment. Total setup time: 5–10 minutes every time.

Stand-alone with LCD: Open the case, press the power button, ready to go. The instrument works everywhere: engine compartments, basements, utility shafts, roofs, or outdoor environments in wet conditions. Setup time: 15 seconds.

For service technicians performing 5 to 15 inspections per day, the LCD design is not a luxury — it saves 30 to 60 minutes of setup time every day.

SD card recording — documentation that wins insurance claims

Instruments equipped with SD card recording can capture images or video directly during the inspection. This is critical for three reasons:

Insurance documentation: When filing an insurance claim for water damage or engine failure, insurers require proof of cause. A video clearly showing a corroded pipe, a cracked cylinder liner, or a failed gasket provides indisputable evidence of the nature of the damage.

Customers asking ”what’s the issue?”: When a plumbing technician charges 5,000 SEK for clearing a residential drain line, property owners want to see why — a 30-second video clip immediately shows the root intrusion, blockage, or corroded joint.

Before/after documentation: During remediation and repair work, you can document the problem area beforehand, perform the work, and capture the finished result. This is standard practice in modern quality management systems and often mandatory in public procurement tenders.

Optional accessories — mirrors and magnets

The borescope supports accessories that significantly expand its versatility:

  • Angled mirrors: The standard probe looks straight ahead. Mirrors with 45° or 90° angles allow you to inspect pipe walls or the underside of concealed components without bending the entire cable.
  • Magnetic attachments: A small magnetic tip attached to the probe head can be used to retrieve small ferrous objects — such as nuts, washers, and dropped tool bits — from engines or tight cavities.

These accessories are sold separately and turn the instrument into a multi-functional maintenance tool.

Where the LCD Monitor Borescope makes a real difference

Plumbing and drainage services: Diagnosing blockages, corroded pipes, misaligned joints, and root intrusions in building drain systems. Streamlined invoicing backed by visual proof for the customer.

Automotive and engine workshops: Inspecting cylinder bores without removing the cylinder head. Detecting damaged valves, scored piston crowns, and foreign objects inside cylinders.

Property management: Routine inspections of ventilation ducts, shared drain stacks, and utility shafts without opening access panels.

Marine service and boatbuilding: Inspecting engine interiors, LPG tank compartments, and inaccessible bulkheads where clearance is extremely limited.

Industrial and process piping: Checking condensate lines, steam piping, and pressurized systems for corrosion, scale build-up, and leaks.

HVAC and ventilation technicians: Diagnosing supply and exhaust air ducts, verifying filter seating, and checking damper operation without dismantling ductwork.

Firearms and defense maintenance: Inspecting gun barrels, internal mechanisms, and other critical technical components requiring precise internal quality control.

Antique restoration and conservation: Non-destructive inspection and documentation of internal structures in museum artifacts, period furniture, and works of art.

Building inspection and damage assessment: Detecting concealed structural defects inside walls, floor joists, and ceilings without opening up assemblies.

Commercial kitchens and restaurants: Inspecting exhaust hoods, ductwork, and tight pipe runs where accumulated grease presents a fire hazard.

What is included

LCD Monitor Borescope with 5.5 mm probe head × 10 m cable reach, 3.5″ LCD TFT display (640×480), adjustable illumination brightness, SD card recording for still images and video, USB 2.0 interface for PC transfer, durable ruggedized plastic housing, battery-powered for field use.

The instrument investment is 22,495 SEK. Compared to the cost of a single excavation or wall opening that the borescope renders unnecessary (typically 25,000–80,000 SEK to open up walls or ground structures), the instrument pays for itself on the first job. Mirror and magnet accessory kits are sold separately.

Read more: LCD Monitor Borescope 5.5 mm × 10 m in the shop →

More news

All news