Hoppa till innehåll
Free shipping on orders over 3000 kr excl. VAT! Volume discount: 5 pcs 2% · 10 pcs 3% · 25 pcs 5%
Volume discount: 5 pcs 2% · 10 pcs 3% · 25 pcs 5%What You Can’t See Around the Corner Costs More Than What You Dismantle to Get AccessSee the solder joint and surface defect on a screen instead of through a magnifier, and document it right awayReflections on shiny metal surfaces cause defects to be missed, but a polarizing filter removes themA 0.1 mm groove is visible in the image but can’t be measured: how to get both sharpness and depth from the same microscopeMeasure directly in the image: no more guessing the magnification or fighting reflections during microscopic inspectionSee inside the machine without taking it apart: a camera in the tip gives a sharper image than fiber opticsReflections hide the flaw: how to see scratches, burrs and solder defects on shiny surfacesSpotting the fault in the pipe before you tear up the floor saves more than the repair itselfShiny metal surfaces hide scratches and cracks until the reflections disappear from the imageSee what’s behind the hole: documented inspection of tight spaces without disassemblyVolume discount: 5 pcs 2% · 10 pcs 3% · 25 pcs 5%What You Can’t See Around the Corner Costs More Than What You Dismantle to Get AccessSee the solder joint and surface defect on a screen instead of through a magnifier, and document it right awayReflections on shiny metal surfaces cause defects to be missed, but a polarizing filter removes themA 0.1 mm groove is visible in the image but can’t be measured: how to get both sharpness and depth from the same microscopeMeasure directly in the image: no more guessing the magnification or fighting reflections during microscopic inspectionSee inside the machine without taking it apart: a camera in the tip gives a sharper image than fiber opticsReflections hide the flaw: how to see scratches, burrs and solder defects on shiny surfacesSpotting the fault in the pipe before you tear up the floor saves more than the repair itselfShiny metal surfaces hide scratches and cracks until the reflections disappear from the imageSee what’s behind the hole: documented inspection of tight spaces without disassembly

Extech HDV640 HD Video Borescope with 6 mm Articulating Probe 320°, 1 m: When a Rigid Borescope for Gear Coupling Inspection Misses 70% of the Chamber Geometry

Published July 7, 2026 at 14:32

Industrial endoscopy (visual inspection of internal machine cavities without disassembly) is one of the most cost-effective diagnostic techniques available. Disassembling a mechanical component to inspect for damage or wear takes hours to days, requires specialized tools, and risks damaging the component during disassembly. Endoscopic inspection takes minutes. However, conventional endoscopes with fixed straight-view optics have a fundamental limitation: they only see what is directly in front of the probe. Damage and wear located around bends, on sidewalls, or in angled spaces remain invisible. A steerable-probe endoscope with an articulating tip solves this exact problem.

What the Extech HDV640 Is

HD video inspection camera with control handle and articulating camera tip, 6 mm diameter and 1 m length (HDV640) is a professional video endoscope from Extech. The instrument:

  • Features a 6 mm semi-rigid probe with a 1 m working length.
  • Features a steerable (articulating) tip with up to 320° viewing angle.
  • Features a 5.7″ color LCD TFT display with 640×480 resolution.
  • Features four built-in LED lights on the camera tip with a dimmer.
  • Includes a waterproof camera probe (IP-rated for immersion in water and oil).
  • Features SD card storage for 14,600+ images or 4+ hours of video.
  • Features a voice annotation function to record comments during inspection.
  • Features an AV output for viewing on an external monitor.
  • Features USB for PC transfer.
  • Features a rechargeable 3.7 V Li-Polymer battery.

Basic specifications:

  • Probe diameter: 6 mm
  • Probe length: 1 m (semi-rigid)
  • Tip articulation: Up to 320°
  • Display: 5.7″ color LCD TFT, 640×480
  • Lighting: 4× LEDs with dimmer
  • Optics: Macro lens for glare-free close-ups
  • Water resistance: IP-rated probe
  • Storage: SD card (included), >14,600 images or 4 hours of video
  • Video recording: With voice annotation
  • Outputs: AV (external monitor), USB (PC transfer)
  • Battery: 3.7 V Li-Polymer, rechargeable
  • Accessories: Power adapter, USB and AV cables, hard case
  • Optional: Wireless 30 m video transmitter

Extech HDV640 HD video inspection camera with steerable 6mm probe

320° Articulation — What It Means in Practice

Steerable-tip endoscopes are classified by their articulation range:

  • 2-way articulation: Up/down only. Total range of 180–200°.
  • 4-way articulation: Up/down + left/right. Total range of 300–320°.
  • 360° articulation: Full continuous control (found on premium industrial endoscopes).

The HDV640 with 320° articulation is essentially a 4-way system. The operator can view:

  • Straight ahead (0°): standard direction.
  • 90° up: view the top of the object ahead.
  • 90° down: view the underside.
  • 90° right/left: view sidewalls.
  • 150–160° (near-backward): view components located diagonally behind the probe tip.

The combination of up/down + left/right allows the operator to ”sweep” a circular view around the probe tip’s position — which is indispensable when inspecting pipelines, cylinders, and chamber walls.

6 mm Probe Diameter — What Fits and What Doesn’t

Probe diameter determines which cavities can be accessed. 6 mm is a versatile mid-range size:

  • 3–4 mm probe: Fits into engine spark plug holes (14 mm thread), narrow tubes.
  • 6 mm probe (HDV640): Fits into 8–12 mm pipes, gearbox housings, engine manifolds.
  • 8–10 mm probe: Larger pipes, tank inspections.
  • Over 10 mm: Very rugged probes with heavier articulation mechanisms.

A semi-rigid probe means the operator can feed the probe into curved cavities — it is rigid enough not to collapse, yet flexible enough to follow natural bends. A fully rigid probe would be limited to straight-line access only.

Illumination: LEDs with Dimmer

Inside a mechanical component, there is zero ambient light. The probe tip carries 4 LEDs that project forward. The dimmer is critical for different inspection scenarios:

  • Short distance (10–30 mm): Low brightness to avoid overexposure and image glare.
  • Long distance (50–200 mm): Full brightness to reach the end of the cavity.
  • Reflective surfaces (polished metal, water surfaces): Dim down to reduce reflections.
  • Matte surfaces (rust, oxidation): Full brightness to bring out surface details.

Voice Annotation During Inspection

Video recording with synchronized voice annotation is particularly valuable for:

  • Insurance and damage documentation: The operator documents exactly what is seen and where, in real time.
  • Maintenance logs: Plant documentation of inspection findings.
  • Training: New technicians can later listen and learn from an experienced technician.
  • Remote consultation: Video and commentary can be sent to an off-site expert for analysis.

Where a Steerable Video Endoscope Makes a Real Difference

Automotive repair — engine inspection: Cylinder walls, piston crowns, valve seats. The 6 mm probe fits easily into spark plug holes once the plugs are removed.

Aviation engine inspection: Turbine blades, combustion chambers, combustor liners. Regulatory requirements often mandate visual inspection without engine teardown.

Marine engine monitoring: Diesel main engine cylinders. Piston ring wear, cylinder liner condition checks.

Industrial gearboxes: Gear tooth wear, oil condition, chipped metal. Inspect without opening the gearbox casing.

Piping system inspection: Plumbing, hydraulic lines, pneumatic lines. Leak and corrosion detection.

Pressure vessel inspection: Boilers, autoclaves, pressure tanks. Corrosion and crack monitoring.

Chimney and flue gas duct inspection: Flue interiors, soot damage, thermal cracking.

Electrical cable ducts and conduits: Cable tray inspections, insulation wear, physical damage.

Building inspection cavities: Interstitial ceiling spaces, false ceilings, voids inaccessible to hand tools.

Nuclear and petrochemical industry: Reactor interiors, heat exchangers, catalyst beds. Radiation-safe inspection via video probe.

Pest and rodent diagnostics: Nesting areas within walls, ceilings, and crawl spaces.

Video Formats and Documentation Workflow

SD card storage in JPEG (images) and MPEG (video) formats ensures broad compatibility for:

  • Direct playback in standard media players.
  • Importing into Excel/Word for reporting and documentation.
  • Cloud uploads for remote analysis.
  • Long-term archiving for warranty and compliance records.

What You Get for Your Investment

The Extech HDV640 HD video inspection camera kit includes: 6 mm probe diameter × 1 m semi-rigid working length with macro lens, steerable tip with up to 320° articulation, 5.7″ color LCD TFT display with 640×480 resolution, 4× LED illumination with dimmer, waterproof probe, SD card (>14,600 images / 4 hours of video), voice annotation recording, AV output for external display, USB for PC transfer, 3.7 V Li-Polymer rechargeable battery, power adapter, USB and AV cables, and a hard transport case.

43 766 SEK represents the equipment investment. Compared to basic straight-view endoscopes without articulation (3 000–15 000 SEK, limited to straight line-of-sight), the HDV640 enables you to inspect complex 3D geometries inside mechanical assemblies. Compared to high-end video borescopes (Olympus, Karl Storz, GE Mentor at 100 000–500 000 SEK), the HDV640 provides a mid-range professional solution ideal for workshops and industrial maintenance teams that do not require aerospace-grade pricing.

Learn more: Extech HDV640 video endoscope in the shop →

More news

All news