Hoppa till innehåll
Free shipping on orders over 3000 kr excl. VAT! Volume discount: 5 pcs 2% · 10 pcs 3% · 25 pcs 5%
Volume discount: 5 pcs 2% · 10 pcs 3% · 25 pcs 5%What You Can’t See Around the Corner Costs More Than What You Dismantle to Get AccessSee the solder joint and surface defect on a screen instead of through a magnifier, and document it right awayReflections on shiny metal surfaces cause defects to be missed, but a polarizing filter removes themA 0.1 mm groove is visible in the image but can’t be measured: how to get both sharpness and depth from the same microscopeMeasure directly in the image: no more guessing the magnification or fighting reflections during microscopic inspectionSee inside the machine without taking it apart: a camera in the tip gives a sharper image than fiber opticsReflections hide the flaw: how to see scratches, burrs and solder defects on shiny surfacesSpotting the fault in the pipe before you tear up the floor saves more than the repair itselfShiny metal surfaces hide scratches and cracks until the reflections disappear from the imageSee what’s behind the hole: documented inspection of tight spaces without disassemblyVolume discount: 5 pcs 2% · 10 pcs 3% · 25 pcs 5%What You Can’t See Around the Corner Costs More Than What You Dismantle to Get AccessSee the solder joint and surface defect on a screen instead of through a magnifier, and document it right awayReflections on shiny metal surfaces cause defects to be missed, but a polarizing filter removes themA 0.1 mm groove is visible in the image but can’t be measured: how to get both sharpness and depth from the same microscopeMeasure directly in the image: no more guessing the magnification or fighting reflections during microscopic inspectionSee inside the machine without taking it apart: a camera in the tip gives a sharper image than fiber opticsReflections hide the flaw: how to see scratches, burrs and solder defects on shiny surfacesSpotting the fault in the pipe before you tear up the floor saves more than the repair itselfShiny metal surfaces hide scratches and cracks until the reflections disappear from the imageSee what’s behind the hole: documented inspection of tight spaces without disassembly

5.5 mm × 30 m LCD Monitor Endoscope: When the Drain Pipe Bends Four Times in 25 Meters and the Camera’s Bend-Force Balance Determines Whether the Probe Actually Gets Through

Published July 7, 2026 at 14:52

Long-range industrial and plumbing endoscopy has completely different technical requirements than short-range machinery diagnostics. A 1-meter probe is sufficient to inspect a cylinder or an electrical cabinet — but entirely inadequate when a municipal sewer pipe must be tracked 25 meters through several turns to locate a seal defect. Such tasks require an endoscope with a probe length of 10 to 50 meters, along with the right balance between probe flexibility (to navigate bends) and rigidity (to push forward against friction). An LCD monitor endoscope with a 5.5 mm probe diameter and a 30-meter working length is a standard tool for plumbing, water/wastewater, and building inspection technicians.

What the 5.5 mm × 30 m LCD Monitor Endoscope Is

The LCD Monitor Endoscope 5.5 mm x 30 m (item 192-55IM-055-30M) is a long-range fiberscope with an integrated LCD display and digital recording capabilities. The instrument:

  • Features a 5.5 mm probe diameter and a 30-meter working length.
  • Features a 3.5″ LCD TFT display with 640×480 resolution.
  • Features adjustable brightness via built-in LEDs at the probe tip.
  • Saves images and video to a standard SD card.
  • Can store thousands of images or several hours of video.
  • Features a USB 2.0 interface for PC transfer.
  • Is designed for field use in plumbing, water/wastewater, and industrial environments.

Basic specifications:

  • Probe diameter: 5.5 mm
  • Probe length: 30 meters
  • Display: 3.5″ LCD TFT, 640×480 resolution
  • Light source: Built-in LEDs in the probe tip with adjustable brightness
  • Image storage: SD card (standard, included)
  • Video recording: Yes
  • Data transfer: USB 2.0
  • Probe type: Semi-rigid fiberscope
  • Water resistance: IP-rated probe for immersion

LCD-monitor-endoskop 5,5 mm × 30 m fiberskop för VVS och VA

Why a 5.5 mm Diameter Is the Right Choice for Long Probes

Probe diameter is a trade-off between several physical factors:

Optical quality: Fiber optic bundles with more fibers provide better resolution. A 3 mm probe has ~6,000 fibers, a 5.5 mm has ~25,000–40,000, and an 8 mm has ~50,000+. Image quality scales with the square root of the fiber count.

Mechanical strength: Thin probes buckle too easily under friction. At 30 meters, the probe requires sufficient stiffness to be pushed forward without collapsing into U-turns.

Light budget: Light from the tip LED dissipates according to the inverse-square law over distance. At 30 meters, even the brightest LED will only provide marginal illumination at the tip. The probe also carries light-transmitting fibers to deliver light DIRECTLY to the tip — and a thicker probe can accommodate more optical fibers.

Pipe accessibility: The probe must fit inside the pipe. Municipal sewer pipes are typically 50–150 mm, while industrial process pipes range from 25–100 mm. A 5.5 mm probe fits inside all of these with ease.

A 5.5 mm diameter is the optimal compromise for a 20–50 meter probe length in pipes with diameters exceeding 15 mm.

Practical Limitations of Long Probes

Even with a 30-meter working length, physical constraints remain:

  • Frictional resistance: Beyond 20 meters in a pipe containing small stone and sand particles, friction becomes significant. The operator may need 5–15 kg of force to push the probe forward.
  • Bend limitations: The probe can negotiate bends with a minimum radius of ~10× its diameter (i.e., at least a 55 mm bend radius for a 5.5 mm probe). Tighter U-bends cannot be negotiated.
  • Compounded friction: Each bend increases friction exponentially. After 3–4 bends, the probe may get stuck even if each individual bend is passable.
  • Visibility loss from water and sludge: Immersion in murky or sludge-filled liquid eliminates visibility. The probe must be cleaned between inspections.

In practice: A 30-meter probe typically achieves an effective reach of 15–25 meters in standard pipes with a few bends. In straight, unobstructed runs (e.g., straight pipes with a 100 mm diameter), the entire 30 meters can be utilized.

SD Card Storage for Efficient Documentation Workflows

Video and image storage is critical for professional endoscopic inspections:

  • Insurance claims: Damage claims require visual proof for payouts.
  • Maintenance logs: Property managers’ documentation for annual inspections.
  • Pre-repair preparation: Pre-cleaning documentation to serve as a reference.
  • Post-cleaning verification: Confirmation that the issue has been resolved.
  • Customer reports: Clear visual presentation of findings for non-technical clients.

Standard file formats on the SD card (JPEG images, MP4/AVI video) can be opened natively on PCs and mobile devices for immediate review and email reporting.

Where a 30-Meter Probe Makes a Real Difference

Municipal water and wastewater systems: Pipe inspection between manholes (typically 20–30 meters apart). A probe with a 30-meter reach can inspect an entire section from a single access point.

Residential properties (drains and main stacks): Main soil stacks in multi-story buildings can span 20–40 meters from the basement to the top floor. Enables diagnosis without dispatching plumbers to every floor.

Industrial process piping: Cooling, steam, and chemical pipes in plants where lines are exceptionally long.

Marine vessel systems: Cable ducts, ventilation shafts, and drainage systems on ships. Critical during breakdowns or maintenance planning.

Chimney inspections: Tall flues extending from the roof down to the basement (30–50 meters in high-rise buildings).

Electrical cable conduits: Underground conduits and routing between buildings.

Culverts and stormwater systems: Culvert pipes beneath roads and railways. Bridge drainage systems.

Heating and cooling systems: Radiator supply lines and cooling ducts in older facilities.

Petroleum and chemical industries: Long process lines where non-contact visual inspection is safety-critical.

Structural construction verification: Embedded conduit and piping inside prefabricated walls and floor slabs.

Fiber Optics vs. Digital CCD Probes

The 5.5 mm × 30 m LCD Monitor Endoscope is a fiberscope — meaning it uses optical fiber bundles to transmit the image from the tip back to the camera head at the handle. The alternative is a digital CCD probe, where a micro-camera sits directly at the probe tip and transmits the signal electronically.

Advantages of fiber optics for long probes:

  • No electronics at the tip — superior resistance to water, temperature extremes, and mechanical shock.
  • No signal degradation over 30 meters (fiber optics perform exceptionally well over long distances).
  • No power supply required at the tip.

Disadvantages of fiber optics:

  • Resolution is constrained by the number of individual fibers.
  • Fiber bundles are more vulnerable to sharp bending damage.
  • A subtle ”honeycomb/fiber grid” pattern is visible in the image.

Fiber optic technology remains the standard for probes exceeding 5–10 meters — digital CCD setups become too expensive and fragile over extended lengths.

Practical Operation

  1. Preparation: Flush or mechanically clear the pipe to remove major obstructions.
  2. Access point: Typically a manhole or cleanout port. Feed the probe in gradually.
  3. Brightness adjustment: Increase lighting for dark, deep pipes; decrease it in reflective metal piping.
  4. Continuous video recording: Recommended to capture all details comprehensively.
  5. If the probe encounters resistance: Pull back 1–2 meters, rotate the probe 90°, and try again. Never force it forward.
  6. Post-inspection cleanup: Rinse the probe in a mild detergent solution and wipe dry.
  7. Video review: Analyze the recorded footage on a larger monitor in the office to prepare the final report.

What You Get for Your Investment

An LCD monitor endoscope with a 5.5 mm probe diameter × 30 m working length, a 3.5″ LCD TFT display with 640×480 resolution, adjustable LED illumination at the probe tip, SD card storage for thousands of images and video recording, USB 2.0 connectivity for PC transfer, a semi-rigid fiber-optic probe with IP-rated water resistance, and a standard SD card included.

The instrument requires an investment of 52 105 SEK. Compared to entry-level 5–10 meter probes (10 000–25 000 SEK), this 30 m model covers significantly longer pipe runs. Compared to full-scale CCTV pipe crawler systems with transport carts and 100+ meters of cable (150 000–500 000 SEK, requiring dedicated inspection vans), the LCD monitor endoscope is a fully portable, handheld solution for medium-sized projects. For plumbing, wastewater, and facility maintenance technicians, it strikes the optimal balance between reach and portability.

Learn more: LCD Monitor Endoscope 5.5 mm × 30 m in the store →

More news

All news